Kodak Ngenuity 9090DB - Bbh_Cap_Prn_Cnt_Enable; Bbh_Cap_Prn_Cnt_Max_Dig

Ngenuity TWAIN Data Source November 19, 2009
Page 80 of 99
Allowed Values:
FALSE, TRUE
Default Value:
FALSE
Query Support Value:
TWQC_GET |TWQC_GETDEFAULT |TWQC_GETCURRENT | MSG_SET| MSG_RESET
Stored in registry:
No
Stored in profile:
Yes
3.8.32 BBH_CAP_PRN_CNT_ENABLE
If set, printer counter is enabled and will count, based upon the other settings for the counter. It can
be different on different printers.
Type:
TW_BOOL
Supported Messages:
MSG_GET - TW_ENUMERATION (for 2.0 applications), TW_ONEVALUE (for
<2.0Applications)
MSG_GETCURRENT - TW_ONEVALUE
MSG_GETDEFAULT - TW_ONEVALUE
MSG_RESET – TW_ONEVALUE
MSG_SET – TW_ONEVALUE, TW_ENUMERATION
MSG_QUERYSUPPORT - TW_ONEVALUE
Allowed Values:
FALSE, TRUE
Default Value:
FALSE
Query Support Value:
TWQC_GET |TWQC_GETDEFAULT |TWQC_GETCURRENT | MSG_SET| MSG_RESET
Stored in registry:
Yes
Stored in profile:
Yes
3.8.33 BBH_CAP_PRN_CNT_MAX_DIG
Maximum number of digits for the counter. It will wrap around when it reaches the maximum value
that may be specified with this number of digits. It can be different on different printers.