38
Settings of Smart Device:
1. Enable the Wi-Fi of smart device and then
search surrounding wireless devices.
2. Select the name of camera SSID to be
connected and then input the eight-digit
number password after WPA2-PSK on the
camera.
3. Click the icon of the APP to enable the
APP.
Set up completion:
Once the APP is connected to the camera,
functional operations can be enabled on the
smart device.
Station
Enable image transmission and remote control
by connecting the camera with a Wi-Fi access
point created by your smart device.
1. Enable the Wi-Fi access point of smart
device.
2. Select the on camera and then press
the button to confirm connection with
smart device.
3. Press the [ ]/[ ] button
to select the name of smart device to be
connected and then press the button
to confirm. Then, the camera enters the
password input interface.
-
To Next Page
Loading...
