Sharing the Sensor Between Workstations
KODAK RVG Digital Radiography Systems User’s Guide (CS4000_en) 2–9
Sharing the Sensor
Between Workstations
You can share the sensor between several workstations
to provide access for several practitioners based on an
agreed-upon arrangement. The workstation must have
the Kodak dental imaging software and corresponding
drivers.
To share the sensor between several computers, move
it from workstation to workstation. When you connect
the sensor to a USB 2 port on the computer, the sensor
is recognized automatically and is operational.
To share images between workstations, you can
connect them to a network without having to change
the configuration described above. The Kodak dental
imaging software needs only to access a shared
database on the same workstation or on a remote
workstation.
You can print images either on a printer attached to
each computer or to a printer shared on the network.
Caution!
Do not disconnect
the sensor after you
click on the RVG
Acquisition button.
This can damage
your sensor.
To Next Page
Loading...
