Preventing Electrostatic Discharge
4–4 Disinfecting and Maintaining the Sensor
• Do not disconnect the sensor during the 90-second
delay, in non-synchronized mode, or during
acquisition.
• Do not force, bend, or pull the cable at the sensor
side.
• Do not immerse the sensor remote control.
Preventing Electrostatic
Discharge
To prevent electrostatic discharge, do the following:
• When the sensor is not connected, store it in its
case.
• Never touch the monitor’s screen and the sensor
simultaneously. This can result in serious damage
to the sensor.
• Never touch the contact points of the USB
connector of the sensor.
Protecting Computer Data
Back up the database daily on several high capacity
magnetic media, streamer, ZIP, DAT, used alternately.
Ask for advice from your computer dealer. Store the
copies in a secure location.
To Next Page
Loading...
