Kodak RVG - Acquiring Images; Launching an Image Acquisition; Using the Standard Procedure to Acquire Images

KODAK RVG Digital Radiography Systems User’s Guide (CS4000_en) 3–1
Chapter 3
Acquiring Images
This chapter describes the procedures for acquiring
images.
This chapter includes the following topics:
• Launching an Image Acquisition on page 3–1
• Using the Standard Procedure to Acquire Images
on page 3–1
• Using Templates to Acquire Images on page 3–3
Launching an Image
Acquisition
To launch an RVG image acquisition, click RVG
Acquisition on the toolbar.
Using the Standard
Procedure to Acquire
Images
To acquire a digital intraoral radiographic image,
follow these steps:
1. Cover the sensor with a barrier and place the
sensor in the applicable positioner.
2. Select the timer parameters for your generator.
Note
To determine the
exposure time and
create an exposure
time table for your
sensors, see
“Customizing the
Exposure Chart” on
page 2–7.