Kodak RVG - Using a Display Format to Acquire Images

Using Templates to Acquire Images
KODAK RVG Digital Radiography Systems User’s Guide (CS4000_en) 3–5
Using a Display Format to
Acquire Images
There are three display formats you can use to acquire
images:
• Manual Format—Used for single PAs, up to 40;
this is the default position.
• Operative Radiology Format—Used for vertical
PAs, displays four images simultaneously; useful
in endodontics and implantology.
• RVG Comparison Format—Used with the Size 1
sensor for obtaining images of pre-, peri-, and
post-operative treatments.
To acquire images using a display format, follow these
steps:
1. Click Manual Format on the toolbar.
2. Select the required format from the drop-down
list.
3. Acquire the image using the steps in “Acquiring
Images” on page 3–1.
The image is displayed in the designated location.
4. Continue to acquire images until you complete the
template.
5. When finished, click
Save.
Note
In RVG comparison
format, images are
displayed and viewed
in a vertical orientation.