Kodak RVG - Using an FMS to Acquire Images

Using Templates to Acquire Images
3–4 Acquiring Images
Using an FMS to Acquire Images
To use an FMS to acquire images, follow these steps:
1. Connect the sensors to the digital imaging dock.
2. Open the patient’s record and launch the Imaging
window.
3. Select
Format > Use an FMS. The Select a
format
window is displayed.
4. Double-click a template.
5. Select a frame in which to insert the image. The
frame is highlighted in green.
6. Acquire the image using the steps in “Using the
Standard Procedure to Acquire Images” on
page 3–1.
After you acquire an image, you are automatically
advanced to the next frame in the template in
numerical order, although the next frame is not
highlighted.
7. Continue to insert images until you have
completed the template.
Save
8. When finished, click Save and close the mount.
Note
When you acquire
images in a template,
the images are
pre-oriented.