EasyManuals Logo

Koldfront WAC25001W User Manual

Koldfront WAC25001W
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
3
Preparations for Installation
The following measurements are required to properly install the air
conditioner.
Window Width: 31” to 42”
Window Minimum Height: 19 ½”
NOTE: To avoid risk of injury and/or product/property damage,
please take the following precautions:
- Two or more people are needed to properly handle and install.
- Before installation, make sure that the window and sill are able
to handle the weight and size of this unit.
- Wear protective gloves to avoid injury from sharp edges.
-
- Use proper lifting and carrying techniques.
If you have multiple windows, choose the one closest to an
electrical outlet that will be able to provide sufficient power to your
unit. See the power requirements listed on the product label printed
on the side, or on the back of your window air conditioner.
Before you begin, make sure you have all the parts necessary for
installation.
Tools Needed:
Flat Screwdriver
Phillips Screwdriver
Tape Measure
Level
Drill
NOTE: You may need to
contact your electrician if
your room’s circuit is not
able to power your unit.

Other manuals for Koldfront WAC25001W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Koldfront WAC25001W and is the answer not in the manual?

Koldfront WAC25001W Specifications

General IconGeneral
Description of productWindow Air Conditioner and Heater
ModelWAC25001W
ColorWhite
Voltage/Frequency208-230V / 60Hz
Current (Cooling / Heating)11.3 / 22.5A
BTUs (Cooling / Heating)25, 000 / 16, 000
CoolantR410A, 36.7 oz.
Timer24 Hour
Weight and Dimensions IconWeight and Dimensions
Dimensions W x D x H26.5” x 26.5” x 18.6”
Weight131 lbs.

Related product manuals