CP40/50 Fundamentals & initial start-up Chapter 2
13
2.4 Menu layout
_1_
CHART
_2_
POS
_3_
WP/RTE
_1_ Chart 1 1:26400000 _1_ Position _1_ WP list
_2_ Chart 2 1:6600000 _2_ Set & drift _2_ Routes
_3_ C-MAP cartridges _3_ Speed diagram _3_ Route calculation
_4_ Dual speed _4_ Lines
_5_ Wind _5_ Start track
_6_ MOB position _6_ Tracks
_7_ Satellites _7_ Targets
_8_ DGPS _8_ Data transfer
_9_ DSC alarm
_4_
NAV*
_5_
ECHO
_6_
SPECIAL
_1_ Navigation _1_ Depth & temperature diagram _1_ Speed alarm, units & language
_2_ WP _2_ NMEA interface
_3_ ROUTE _3_ Alarm/log output
_4_ TRACK _4_ Decca lanes
_5_ ANCHOR _5_ Loran C
_6_ Display color
_7_ Factory settings
_4_
NAV**
_1_ Navigation
_2_ Turn NAV off
_3_ ETA & AVN
_4_ Set & drift trim
_5_ WP advance
The NAV menu is dynamic and will adapt to the function
which is currently active.
* No Navigation mode is activated.
** One of the Navigation modes is activated.
To Next Page