CP40/50 Waypoint/route menus Chapter 5
58
5.6 Tracks stored in the memory
All tracks (of more than 1 trackpoint) will automatically be stored in
the memory. To see which tracks are registered, you can scroll through
the list by:
MENU
Call up the menu bar, and…
3,6
load “Tracks” in active window
Track: TRACK 1
Tracking: OFF
Display track: ON
Trackpoints: 25
Type:
As default
from the
factory:
The first
track is
stored as
TRACK1,
the next as
TRACK2,
etc.
A-Z
Select name of track
- or if a number is included in the track name, place cursor on the
number, and …
+/-
Toggle up/down in the track numbers
ENT
Open for change
“Display track” can be set ON/OFF, where OFF will make it invisible
on the screen. Turn ON to put it back on the screen.
+/-
Toggle between available values
ENT
Confirm changes
To Next Page