CP40/50 Waypoint/route menus Chapter 5
60
Place cursor where you wish to make a change i.e. name, color, etc.
A-Z
Key in new values, alphabetical or
0-9
numerical
+/-
Toggle between available values
ENT
Confirm entry
5.8 Data transfer via DataCard
• External memory with data transfer via DataCard:
Use the Simrad DataCard to make backup files of all the user data you
have created plus the current setups in the internal memory of the unit.
Do it whenever you have added important data, or when you wish to
transfer routes and waypoints, etc. to another compatible unit.
The storage capacity of the DataCard is divided into two databanks of
each 450 Kb, meaning that the entire internal memory can be stored on
one DataCard twice.
MENU
Call up the menu bar, and…
3,8
load the ‘Data transfer’ window
Select the drawer where you have inserted the DataCard i.e. [1] for the
upper drawer, and [3] for the lower drawer.
You now have a choice of:
[1] DataCard status
[3] Save on DataCard
[9] Load from DataCard
To Next Page