CP40/50 Chart menus and INFO windows Chapter 3
31
[PLOT]. Continue in this manner till the route is completed. In case you
make a wrong plot, press [CLR] to erase the last plotted position.
Save the route with [ENT] or exit the function with [MENU] to abandon
the route.
5
From active chart display with cursor ON:
To draw lines or to make a route is the same procedure, please refer to
point 4.
6
From active chart display with cursor ON:
Plot target at cursor position with preset target name, etc.
From any other display or from chart display with cursor OFF:
The ship’s position will be plotted as target.
After plotting the target it will be saved in the memory, and you can
edit the target later on, either via the menu or directly from the chart:
Place cursor on the target symbol and press [ENT] to open an info
window with the heading “Target found”. Press [1] Edit user data to
open for new options of editing i.e. move target, delete target, alter the
position, insert a location name (cf.section 2.6) or select a new color
for the target number and symbol (cf.section 2.5).
F See also target display in section 5.7.
To Next Page