CP40/50 Chart menus and INFO windows Chapter 3
34
Rotation resolution can be set to adjust the chart for each 5, 10, 15, 20
or 25° changes in present course or heading.
Depth – Level 1, 2 and 3 are identified by different colors i.e. deep
blue, medium blue and white, where white is for deep water.
Grid the LAT/LON grid can be set AUTO/ON/OFF, and the color of
the grid can be changed.
Show scale ON will add a small line to the chart display indicating that
the length of the line equals a certain number of nautical miles/km.
Auto chart select When sailing with “Auto chart select” ON and cursor
turned OFF, the scale will automatically change to the chart which is
available. But when set to OFF, then the selected scale will remain,
also when sailing “out of the chart”.
The rest of the objects in the chart setup, from Non active waypoints
and down to the last line Target names can all be:
ON = shown on chart or
OFF = not shown on chart, or
AS SELECTED = which means that the choice of having a certain
route shown on the display can be made via the menu e.g. [MENU], [3]
WP/RTE, [2] Routes and [ENT] – where Course line can be set ON or
OFF.
To Next Page
Loading...