CP40/50 NAV menus & navigation examples Chapter 6
68
ETA – Estimated Time of Arrival - refers to the inserted local time,
and can be calculated to any point used for navigation.
AVN – Approximate Velocity Necessary – is automatically calculated
in knots after you key in the planned arrival time and date.
In route navigation the approaching point and present speed over
ground (AUTO) is automatically used for the calculation.
You can change to any waypoint in the route and also insert an alterna-
tive ETA speed (MANUAL).
ENT
Open for change – in route navigation the approaching point is
automatically suggested and present speed is used for calculation.
If required – go to, and…
0-9
Insert alternative routepoint – only in Route navigation.
Go to ETA mode, and…
+/-
Select AUTO or MANUAL
Go to AVN, and…
0-9
Insert time and date
ENT
Confirm entry
To Next Page
Loading...