Advanced features
Erasing a programmable one-touch key
1
Press Program key,
A
,3,0,2,
ENTER
. The
LCD
shows the first programmable
one-touch number that has been programmed:
Note: If P2 appears, it means P1 is empty.
2
Press the programmable one-touch key you want to erase. Here, we’ve
selected P2:
3
To erase a different programmable one-touch key than the one that appears
on the
LCD
, press that key now.
4
Press
ENTER
. The
LCD
shows:
Important: If you want to quit without erasing the programmable one-
touch key you’ve selected, press
CANCEL
. The fax will return to
step 2.
5
Press
ENTER
to erase the number.
To erase another programmable one-touch key, repeat steps 2–5. Or press
STOP
to
return to standby mode.
Erase P One-Touch
** Complete **
P2:Erase P One-Touch
Check Enter/Cancel
Select Program No.
P2:Polling
Select Program No.
P1:Delayed
3.48
To Next Page
