Copy paper/original documents
6
C550 6-9
6.2 Selecting the Paper settings
This section describes the procedures for specifying the size and type of pa-
per loaded in each paper tray.
!
Detail
For details on loading the paper into tray 1 and tray 2, refer to “Loading
paper into tray 1 and tray 2” on page 1-60.
For details on loading the paper into the bypass tray, refer to “Loading
paper into the bypass tray” on page 1-72.
Automatically detecting the paper size (“Auto Detect” setting)
The size of the paper loaded into tray 1 and the bypass tray can be detected
automatically.
The following procedure describes how to specify the setting for automati-
cally detecting the paper loaded into tray 1.
1 In the Basic screen, touch [Paper].
The Paper screen appears.
To Next Page
Loading...
Need help?
General
