Before making copies
1
C550 1-43
can be changed to put the machine in Sleep mode instead. For details,
refer to “System Settings” on page 11-31.
The Low Power mode can also be canceled by pressing any key in the
control panel or by touching the touch panel.
!
Detail
The length of time until the machine enters Low Power mode can be
changed.
For details, refer to “System Settings” on page 11-20 and page 11-31.
Automatically conserving energy (Sleep mode)
If no operation is performed for a specified length of time, the machine auto-
matically enters a mode where it conserves energy.
Although the machine conserves more energy in Sleep mode than in Low
Power mode, the machine must warm up when Sleep mode is canceled to
begin printing again, therefore taking more preparation time than Low Power
mode.
As the factory default, the machine enters Sleep mode after 30 minute.
To recover from Sleep mode
% Press the [Power Save]
key.
– The touch panel is
turned on, and the
machine starts
warming up.
2
Note
The Sleep mode can also be canceled by pressing any key in the control
panel or by touching the touch panel.
To Next Page
Loading...
Need help?
General
