Utility mode
11
C550 11-51
Using PageScope Scan Direct to retrieve documents in user boxes
Box operations using the PageScope Web Connection (The User Box tab
does not appear.)
Stamp Settings
2
Note
If a stamp is set to be added with the “Apply Stamps” parameter, print
settings cannot be changed with the functions on the Stamp/Composi-
tion screen (displayed from the Application screen).
Driver Password Encryption Setting
License Settings
2
Note
For details on Install License, refer to the Quick Guide [Copy/Print/Fax/
Scan/Box Operations].
Displaying the Administrator Settings screen
Follow the procedure described below to display the Administrator Settings
screen by pressing [Utility/Counter] key.
Parameter Description
Apply Stamps Select whether or not a stamp is added when printing or sending.
Delete Registered
Stamp
Select whether or not stamps registered for copy protection can be delet-
ed.
Description Default Setting
The encryption password for the
printer driver can be changed. For
details, refer to the User’s Guide
[Print Operations].
Use Factory Default
Parameter Description
Get Request Code Issues the request code for this machine that registers in the Li-
cense Management Server (LMS).
Install License Select the function to be enabled, and then type in the license
code acquired from the License Management Server (LMS).
List of Enabled Functions Enabled functions can be checked.
To Next Page
Loading...
Need help?
General
