Utility mode
11
C550 11-20
11.3 Specifying user settings
This section describes the function and main registration parameters that
can be specified after pressing the [Utility/Counter] key, then touching [User
Settings].
System Settings
Language Selection
Measurement Unit Settings
Paper Tray Settings
Description Default Setting
Select the language of the Touch panel messages. English
Description Default Setting
Select one of the following as the measurement units in which values are
displayed in the touch panel.
mm (Numerical Value), inch (Numerical Value), inch (Fraction)
mm (Numerical Value)
Parameter Description Default Setting
Auto Tray Selection
Settings
Select the paper trays that are selected automatical-
ly when the “Auto” Paper setting is specified. In ad-
dition, specify the priority of the paper trays when
the auto tray switch operation is performed.
Tray priority order:
Tray 1
→
Tray 2
→
Tray
3
→
Tray 4
→
LCT*
*Appears only when
the LCT is installed.
Auto Tray Switch
ON/OFF
Select whether or not a paper tray loaded with paper
of the same size is selected automatically when a
paper tray that was selected manually becomes
empty while printing copies.
Restrict
No Matching Paper
in Tray Setting
Select the operation that is performed when there is
no paper of the corresponding size in the specified
paper tray.
•
Stop Printing (Tray Fixed):
The machine stops operating.
•
Switch Trays (Tray Priority):
Whether or not the specified paper tray contains
paper of the corresponding size is determined
and, if it does not, a different paper tray is
selected if it contains paper of the corresponding
size.
Stop Printing (Tray
Fixed)
Print Lists Select the paper tray used for printing lists, such as
the sales counter and consumables indicators.
Tray1, 1-Sided
Cover Sheet Feed-
er Setting
Select the paper tray of the post inserter, paper type
and paper size. This parameter is available if the op-
tional post inserter has been installed.
F1, Plain Paper, Auto
Detect
To Next Page
Loading...
Need help?
General
