Utility mode
11
C550 11-124
2
Note
Counting automatically continues with user counters when using external
server authentication.
The public user access is counted as “public” of the counter.
The user box administrator access is counted as “BoxAdmin” of the
counter.
Viewing user counters
1 Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
“Displaying the Administrator Settings screen” on page 11-51.
2 Touch [4 User Authentication/Account Track].
The User Authentication/Account Track screen appears.
3 Touch [2 User Authentication Settings].
The User Authentication Setting screen appears.
?
Why is [2 User Authentication Settings] not available?
% [2 User Authentication Settings] is not available if “User
Authentication” on the General Settings screen is set to “OFF”.
4 Touch [3 User Counter].
5 Touch the button for the desired user, and then touch [Counter Details].
The Counter Details screen for the user appears.
6 Touch the button for the counter to be viewed, and then check the
counter.
– To clear the counters for the current user, touch [Clear Counter] in
the Counter Details screen for the current user. A confirmation
message appears, asking whether the counter should be cleared.
To clear the counters for the displayed user, touch [Yes] in the
confirmation message screen, and then touch [OK]. The maximum
number allowed is not cleared.