Utility mode
11
C550 11-83
Punch Edge Sensor Adjustment
The sensors for detecting the paper edges when printing with a Punch
setting can be adjusted.
2
Note
[Punch Edge Sensor Adjustment] appears only if optional punch kit is in-
stalled on the finisher.
For details on the Punch settings, refer to “Punching holes in copies
(Punch settings)” on page 2-89.
1 Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
“Displaying the Administrator Settings screen” on page 11-51.
2 Touch [1 System Settings].
The System Settings screen appears.
3 Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4 Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5 Touch [8 Punch Edge Sensor Adjustment].
The Punch Size Detect Sensor screen appears.
To Next Page
Loading...
Need help?
General
