103
The driver needs only to be installed once. If the driver cannot be installed automatically,
it can be installed manually with the operating system’s add-new-hardware wizard; see
the instructions on the following page. During installation, if the operating system
requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the
accompanying instructions on the screen. No special driver software is required for other
Windows or Macintosh operating systems.
CONNECTING TO WINDOWS 98 AND 98 SE
Before connecting the camera to the
computer, place the Digital Camera
Software CD-ROM in the CD-ROM drive.
The DiMAGE installer menu should
automatically activate. To automatically
install the Windows 98 USB driver, click on
the Install-the-Windows-98 USB-Mass-
Storage-Driver button. A window appears
to confirm that the driver should be
installed; click “Yes” to continue.
When the driver has been successfully
installed, a window appears. Click “OK.”
Restart the computer and connect the
camera (p. 101) to complete the operation.
Automatic Installation
To Next Page
Loading...
Need help?
General
