113
The number of prints in the print run are displayed as well
as the print parameters selected with the menu. See the
menu navigation section for more information (p. 114).
Press the central button of the controller to begin printing,
or press the menu button to return to the PictBridge screen.
A maximum number of fifty images can be printed.
Once printing begins, the operation can be canceled by pressing
the center of the controller. When printing run is finished, a
message indicates the end of the operation; press the center of
the controller and turn the camera off to end the routine.
If the battery is exhausted before the print run is complete, printing is canceled. Use a
fully-charged battery or the optional AC adapter.
If a minor problem occurs during printing, such as the paper runs out, follow the
procedure recommended for the printer; no action is required for the camera. If a major
printer error occurs, press the center of the controller to end the routine. Refer to the
printer manual for the correct procedure for the printer problem. Check the printer
settings before starting again and deselect the images that were printed.
NOTES ON PRINTING ERRORS
No. of prints:
Print size:
Data print:
7
Printer setup
Printer setup
Printer setup
Printer setup
Print quality:
Layout:
:start
Printing finished.
OK
Always confirm printer and camera settings before a print run to minimize errors. Setting
print parameters with the PictBridge menu (p. 114) avoids having to set up the printer for
each printing session, especially if the printer is used for multiple purposes.
Printing Notes
To Next Page
Loading...
Need help?
General
