93
With the date folder format selected, when an image is recorded, a new folder with the
day’s date is created. All images recorded that day are placed in that folder. Images
recorded on a different day are placed in a new folder with the corresponding date. If the
file number memory function is off (p. 92), when a new folder is created, the serial
number in the image-file name is reset to 0001. If file number memory function is on, the
serial number in the image-file is one greater than the last image saved. For more
information on folder organization and file names, see page 106.
DATE AND TIME SETUP
It is important to accurately set the clock. When a still image or a movie clip is recorded,
the date and time of the recording are saved with the image and are displayed during
playback or can be read with the supplied DiMAGE Master Lite software. The date format
that is displayed or imprinted can be changed: YYYY/MM/DD (year, month, day),
MM/DD/YYYY (month, day, year), DD/MM/YYYY (day, month, year). The date/time setup
screen is opened from section 2 of the setup menu (p. 88).
Use the left and right keys to select the item to
be changed.
Use the up and down keys to adjust the item.
Press the central button to set the clock and
calendar.
Date/Time setup screen
MM / DD / YYYY
0 : 0
Date/Time set
:enter
:sel.:move
2005 . 1. 1
To Next Page
Loading...
Need help?
General
