110 D
ATA-TRANSFER MODE
CHANGING THE MEMORY CARD
Windows 98 and 98 Second Edition
1.Turn off the camera.
2.Change the memory card.
3.Turn on the camera to remake the USB connection.
If Kodak EasyShare is installed, right click on the EasyShare icon on the task bar and
quit the application before disconnecting the camera.
Windows Me, 2000 Professional, and XP
Macintosh
1.Stop the USB connection using the unplug-or-eject-hardware routine (p. 108).
2.Turn off the camera.
3.Change the memory card.
4.Turn on the camera to remake the USB connection.
1.Stop the USB connection by dragging the drive icon into the trash (p. 109).
2.Turn off the camera.
3.Change the memory card.
4.Turn on the camera to remake the USB connection.
Never remove the card when the access lamp is red - the data or
memory card may permanently be damaged.
QUICKTIME SYSTEM REQUIREMENTS
QuickTime is used for playing back movies.
To install QuickTime, follow the instructions in
the installer. QuickTime is not supplied with
the camera in all sales regions. Users can
download the latest version of QuickTime free
of charge from the Apple Computer web site
at http://www.apple.com.
IBM PC / AT Compatible
Pentium processor-based PC
or compatible computer
Windows 98, Me, 2000, or XP.
128MB or more of RAM
To Next Page
Loading...
Need help?
General
