98 S
ETUP MENU
VIDEO OUTPUT
Camera images can be displayed on a television (p. 86).
The video output can be changed between NTSC and PAL
in section 4 of the setup menu. North America uses the
NTSC standard and Europe uses the PAL standard. Check
which standard is used in your region to play back images
on your television set.
TRANSFER MODE
The data-transfer mode must be specified depending on whether images are transferred
to a computer or printed directly. The data-storage option must be selected to transfer
data from the camera to a computer or when using the DiMAGE Master Lite software.
The PictBridge option allows images to be printed directly from the camera with a
PictBridge compatible printer (p. 112).
Video output
Transfer mode
NTSC
Data storage
Off
10 sec.Self-timer
Digital zoom
To Next Page
Loading...
Need help?
General
