To use the built-in flash, simply raise it (1). Lower the
flash unit to prevent it from firing. Flash-mode indicator
turns red while the flash is charging; wait until it
becomes white before taking pictures.
To change the flash mode, raise the flash and press the
flash mode button (2) until the appropriate mode is
indicated.
Autoflash - the flash fires automatically in low-light and
backlit conditions.
Red-eye reduction - multiple flashes are used before
the main flash burst to reduce red-eye; an effect
caused by light reflected from the retina. Use in low-
light conditions when taking photographs of people
or animals. The pre-flashes contract the pupils of the
subject’s eyes.
Fill-flash - the flash fires with each exposure
regardless of the amount of ambient light. Fill-flash
can be used to reduce harsh shadows caused by
strong direct light or sunshine.
Slow sync. - flash and ambient light exposures are
balanced. Use slow sync. when in dark locations
to reveal background details. Ask your subject
not to move after the flash burst; the shutter may
still be open for the background exposure.
Because exposures can be long, the use of a
tripod is recommended.
Flash cancel - the flash is down and cannot fire.
26 B
ASIC RECORDING
Autoflash
Fill-flash
Slow sync.
Autoflash with
red-eye reduction
FLASH MODES
Fill-flash
Flash cancel
2
1
To Next Page
Loading...
