This mode makes a three-image bracket of a scene.
Bracketing is a method of taking a series of images of
a static subject in which each image has a slight
variation in exposure. The bracketing mode is set in
section 1 of the recording menus.
Immediately after selecting the bracketing option on
the menu, a selection screen is displayed to select the
bracketing increment.
Press the left/right keys of the controller to select the
bracketing increment. Press the central button of the
controller to set the value. To change the increment,
select the bracketing drive mode again with the menu.
52 A
DVANCED RECORDING
BRACKETING
Compose the picture as described in the basic
recording operation section (p. 22).
Press the shutter-release button partway down (1) to
lock the focus exposure for the series.
Press and hold the shutter-release button all the way
down (2) to make the bracket series; three
consecutive images are captured. Focus is locked
with the first frame.
:select
:enter
2
1
Drive mode
Image size Self-timer
Single
Progressive
Bracketing
Quality Continuous
White balance
Anti-shake
To Next Page
Loading...
Need help?
General
