2.2 Unpacking
2-5
2.2.2 Removing Packing Materials
Remove the cardboard outer case and moisture-proof bag.
1 While holding the fixing band in one hand, cut it
using a cutter.
•
Two fixing bands
2 Cut the adhesive tape on the top and bottom of
the outer case using a cutter.
3 Open the upper part of the outer case and take
out the accessory bag.
4 Remove the following items that are placed
around the main unit.
•
One slope
• Four pieces of buffer material
Caution
Avoid standing right in front of the bands.
When a tightly stretched fixing band is cut, it
may hit the worker.
Caution
Be careful not to damage the items inside.
Note
The items in the accessory bag are checked
in “2.2.4 Checking Accessories” described
later.
Importan
Do not discard the slope. It is used when
moving the main unit down to the floor.
0404YF220A.book 5 ページ ２００９年８月２０日 木曜日 午後１時２６分
To Next Page
Loading...
