Konica Minolta REGIUS 110 HQ - Installing External Panels

2.3 Removing Protective Parts
2-16
2.3.6 Installing External Panels
Install the removed external panels.
1 Install the first front panel.
•
Six screws (M4 × 8)
Hold the bottom of the first front panel with both hands
and push the top of the panel into the top panel.
2 Close the second front cover.
3 Install the first front back panel.
•
Seven screws (M4 × 8)
Hold the bottom of the first front back panel with both
hands and push the top of the panel into the top panel.
This is the final step in the process of installing the external panels.
Proceed to “2.5 Moving to and Fixing at Installation Location” to move the machine and fix it at the
installation location
First front
side
B
ac
k
o
f
t
h
e
fir
st
fr
o
n
t
s
i
de
0404YF220A.book 16 ページ ２００９年８月２０日 木曜日 午後１時２６分