3.2 Connecting System
3-3
3.2 Connecting System
Connect the unit to the system.
3.2.1 Upgrading REGIUS Console
Upgrade the application program when the unit is connected to an existing CS-3 or CS-2 REGIUS
console in the system.
The following versions of the REGIUS console application support the unit.
• CS-3 : V3.01 R00 or more
• CS-2 : V1.40 R00 or more
Requirements
The procedures described in this manual require the following tools:
For information about the procedure for upgrading, refer to the REGIUS console Installation/Service
Manual.
This is the final step in the process of upgrading the REGIUS console.
No. Tools
1 CD containing the new version of the REGIUS console program
0404YF220A.book 3 ページ ２００９年８月２０日 木曜日 午後１時２６分
To Next Page
Loading...
