18
(b) The LEDs on the boom indicate the bars to be edited. Used for paern editing.
If you press the
<
(YES) buon or
<
(NO) buon, you can change the bar to
be edited (1 ... 4). You can also reduce the number of bars (SHRINK) by pressing
the
<
(YES) buon while holding down the SHIFT buon, and increase the
number of bars (EXPAND) by pressing the
<
(NO) buon while holding down
the SHIFT buon.
TIP
In Global mode, you can set how to increase the number of bars for the bar to
EXPAND for the rst time.
The GLOBAL seing does not apply to bars that you have increased previ-
ously.