27
RESON(CUTOFF RESONANCE) [0.0%...100.0%]
Adjusts the cuto resonance of the lter.
If you increase the value, the lter oscillates, which may cause the sound to
continue.
MIX/ROUTE
PAN [L100%...L1%, C, R1%...R100%]
Adjusts the pan pot (left and right stereo localization).
DELAY [0.0%...100.0%]
Adjusts the feed amount of the delay eect.
REVERB [0.0%...100.0%]
Adjusts the feed amount of the reverb eect.
MASTER [ON, BYPASS]
Sets the master eect to On or Bypass.
SIDECH (SIDECHAIN) [0.0%...100.0%]
Adjusts the feed amount of the SIDECHAIN pass.
TIP
The master eect has an input that is referred to as the SIDECHAIN pass.
For example, in COMPRESSOR, you can use the SIDECHAIN pass to ob-
tain a ducking eect.
SD (Snare drum)
Control knob
DECAY [0...1023]
Adjusts the sounding length of the drumhead. The greater the value, the longer the sound.
TUNE [0...1023]
Adjusts the pitch. The greater the value, the higher the sound.
SNAP.DEC (SNAPPY DECAY) [0...1023]
Adjusts the snappy sound length of the snare drum.
SOUND SELECT
SNAPPY TYPE [01..09]
Select the snappy tone of the snare drum.
PARAMETERS
TONE [0.0%...100.0%]
Adjusts the tuning deviation of the two drumheads.