43
BOOST [0.0dB...12.00dB]
Adjusts the boost amount. You can increase up to 12 dB.
PARAMETERS - For EQ Three
LOW [-64.0dB...6.0dB]
Adjusts the boost/cut amount in the low range.
MID [-64.0dB...6.0dB]
Adjusts the boost/cut amount in the mid range.
HIGH [-64.0dB...6.0dB]
Adjusts the boost/cut amount in the high range.
GAIN [-6.0dB...6.0dB]
Adjusts the gain of the entire input signal.
LOW/MID [0.0%...100.0%]
Adjusts the crossover frequency from the low range to the mid range.
MID/HIGH [0.0%...100.0%]
Adjusts the crossover frequency from the mid range to the high range.
SLOPE [12dB, 24dB]
Select the equalizer curve. 24dB is a steep curve.
To Next Page
Loading...
