Korg drumlogue - Page 7

7
12.
Display
This display shows information such as the current program, drum kit, and
paern step as well as various parameter seing values.
13.
Parameter knobs 1 to 4
Select the item shown on the display or change the parameter value. If seing
items span over multiple pages, the indicator such as "1/2" (the rst page of the
two pages) appears in the upper right corner of the display. Use these knobs in
combination with the PAGE UP/DOWN buon.
14.
(PLAYBACK)/(STOP) button
Each time you press this buon, this unit starts or stops playback. If you press
the buon again after stopping, playback starts from the beginning of the pat-
tern. Each time you press this buon while holding down the SHIFT buon,
playback starts from the pause or stop position.
15.
(REC) button
Used for real-time recording. Each time you press this buon, recording
switches between start and stop. In addition to steps, you can record accent,
knob, and parameter motions (MOTION).
TIP
For step edit, press the STEP buon.
16.
PROGRAM SELECT button
Press this buon to select a program for this unit. If you press this buon while
holding down the SHIFT buon and select a program, you can switch to a new
program at the end of a bar or paern (→ p.44 "QUEUE (QUEUE MODE)").
17.
PROGRAM SAVE button
Press this buon when saving the changed program to this unit. You can save
up to 128 programs in total; 16 programs each in eight banks, A to H.
18.
KIT SELECT button
Press this buon to select a drum kit of this unit. If you press this buon while
holding down the SHIFT buon and select a drum kit, you can switch to a new
drum kit at the end of a bar or paern (→ p.44 "QUEUE (QUEUE MODE)").
19.
Kit save button
Press this buon when saving the changed drum kit to this unit. You can save
up to 128 programs in total; 16 programs each in eight banks, A to H.
20.
LIVE button
Press this buon to shift to Live mode. In Live mode, you can press buons 1
to 13 (BD to USER) to check the sound. You can also set global parameters by
pressing this buon while holding down the SHIFT buon ("Global Param-
eters" p.44).
21.
CHAIN button
Press this buon when using Chain mode, which allows you to connect mul-
tiple rhythm paerns to enhance performance ("Chain mode" p.20).