Calibrating the touch screen |17
Calibrating the touch screen
Calibrating the screen
From time to time (for example, after loading a new operating system), cali-
brating your Color TouchView™ display may be necessary to make pointing
more precise.
To be more accurate, use a tablet stylus or the tip of a pen cap.
Warning: Do not use sharp objects, or you will damage your screen!
1 Keep the GLOBAL button pressed, until the Touch Panel Calibration page
appears.
2 First touch exactly inside the set of arrows in the upper left corner of the
display.
3 The arrows will subsequently move to the other corners of the display. Touch
exactly inside them.
4 Finally, touch Save to confirm the new calibration.
▪ In case you want to exit and cancel the calibration, press the EXIT button
before completing the procedure.
To Next Page
Loading...
Need help?
General
