Choosing the Sounds |37
Display Hold
You may prefer to leave a Select window open after you have chosen a
Sound, Performance, STS or Style, to continue trying other elements in that
window. Or, you may prefer it automatically closes after you have completed
your choice. This is determined by the Display Hold parameter.
Turning the Display Hold parameter on or off
1 Go to the Global > General Controls > Interface page.
2 Turn the Display Hold parameter on of off:
▪ Select the Display Hold On checkbox to turn it on. Sound, Performance,
STS or Style Select windows will remain open on the display, until you
press the EXIT button.
▪ Deselect the Display Hold On checkbox to turn it off. Sound,
Performance, STS or Style Select windows will automatically close af-
ter you choose an element.
3 Press the EXIT button to return to the previous page.
Sound, Performance, STS
Sounds are the basic element of what you hear from your instrument. A set
of Sounds can be memorized into a Performance or STS.
A Performance is a single memory location that can remember the
Keyboard Sounds and all their transposition, effects, etc… A Performance
can be stored in one of the Performance bank locations.
Single Touch Settings (STS) are similar to Performances, but are associated
to a Style or SongBook Entry. Therefore, a set of four STSs is recalled each
time you select a Style or SongBook Entry.
Parts, tracks, channels
On the keyboard, Sounds are assigned to one of the keyboard parts (Upper,
Lower). In Styles and MIDI Songs, Sounds are assigned to tracks. Tracks are
the equivalent of recorder tracks (with the associated mixer channels). In
fact, Havian 30 does include a recorder and a digital mixer! Assigning single
Sounds to tracks simplifies the way you can mix and record them.
To Next Page
Loading...
Need help?
General
