166
4. Select the desired bank file, and touch Open to gain access
to the single items.
5. Once you have selected the file that you want to save, touch
Save To to confirm the selection. The list of files of the tar-
get device is shown.
6. If needed, use the Device pop-up menu to select a different
target device. When the target device is selected, its content
will appear in the display.
7. At this point, you can:
• Touch the New SET button and create a new “.SET” folder
(see “Creating a new “.SET” folder” on page 166), or
• Select an existing “.SET” folder, and touch Save to con-
firm.
8. A dialog box appears, asking you to select one of the avail-
able User (or Favorite Style) locations inside the selected
folder
In the above dialog box, the previously selected Style will be
saved to location 01 inside the bank Usr01 inside the
selected folder.
9. Touch OK to confirm, or Cancel to abort.
War ni ng : After confirming, the same item in the target folder
is deleted.
Creating a new “.SET” folder
Pa600 proprietary data must be saved in special folders with the
“.SET” extension. These special folders can be saved inside ordi-
nary folders.
When saving, you can save onto existing “.SET” folders, or you
can create a new folder of this type. Here is how to do it.
1. When the directory of the target device is shown in the dis-
play, the “New SET” button appears among the buttons
below the file list.
2. Touch the New SET button. A dialog box appears, asking
you to enter a name for the new “.SET” folder.
3. Touch the (Text Edit) button to open the Text Edit
window. Enter the name, then touch OK to confirm and
close the Text Edit window. Note: The “.SET” file name
extension is added automatically.
4. Touch OK to create the new folder and exit the dialog box.
To Next Page
Loading...
Need help?
General
