Korg prologue - Page 26

26
SYNC: With this type of modulation, the phase of Oscillator 2 is forcibly synchro-
nized to the phase of Oscillator 1.
This adds harmonic overtones to the frequency of Oscillator 2, making a complex
waveform.
CROSS MOD DEPTH knob [0...1023]
Cross Mod (Modulation) allows Oscillator 1 to modulate the pitch of Oscillator 2.
Turning the knob to the right results in stronger modulation.
MULTI ENGINE
The MULTI ENGINE is a digital
sound generation engine developed
especially for this instrument.
This engine operates as either a
noise generator, a VPM oscillator
or a user oscillator, to make a wide range of sounds not possible with analog oscil-
lators.Youcanuploadyourownoscillatorprogramstotheuseroscillatortomake
sounds.
NOISE/VPM/USR switch [ , , USR]
This sets which engine will be used, the noise generator, VPM oscillator or user os-
cillator.
(NOISE): The MULTI ENGINE is used as a noise generator.
(VPM): The MULTI ENGINE is used as a VPM oscillator.
USR: The MULTI ENGINE is used as a user oscillator.
TheOCTAVEswitch,TYPEknobandSHAPEknobworkdierently,dependingon
theNOISE/VPM/USERswitchseing.Theseingsareexplainedbelow.
Sync
VCO 1 Wave
VCO 2 Wave (original)
VCO 2 Wave (output)