Korg prologue - Page 50

50
Button 7 (MULTI ENGINE)
ThisbuoncongurestheMULTIENGINEseings.
Theparametersthataredisplayedwillchange,dependingontheseingsin“NOISE/
VPM/USRswitch”(p.26), MULTI ENGINE.
When the noise generator is selected
There are no parameters to set for the noise generator.
When the VPM oscillator is selected
The VPM oscillator has 16 presets, each with six parameters.
Youcansettheseparameterstomakechangestothesound.
Ifallparametersaresetto0%,theeectssetinthepresetwillbeused,andtheeect
will increase as the value is increased (+).
Feedback (Parameter 1) [-100%...+100%]
Sets the depth of the modulator feedback.
Noise Depth (Parameter 2) [-100%...+100%]
Adjuststhedepthofthenoisemodulation.
Shape Mod Int ( Parameter 3) [-100%...+100%]
AdjuststhedepthoftheinternalEGeect.
Mod Attack (Parameter 4) [-100%...+100%]
AdjuststheaacktimeoftheinternalEG.
Mod Decay (Parameter 5) [-100%...+100%]
AdjuststhedecaytimefortheinternalEG.
Mod Key Track ( Parameter 6) [-100%...+100%]
Adjuststhedepthofthemodulatoreectfromkeyboardtracking.Thehigherthe
soundfrequency,thelessnoticeabletheeectbecomes.
When the user oscillator is selected
Seethe“prologueusercontentsguide”(www.korg.com)fordetails.