Synthesis page
21
Low Resonance
High Resonance
Trim
[0…100]
is adjusts the volume level at the input to the lter. If you notice that the sound is distorting, especially with high
Resonance settings, you can turn the level down here.
Out (Output Level)
[0…100]
is controls the output level of the lter.
2-Pole LP/HP/BP/BR
(Resonance) Bass
[Full, Tight]
is is available only when Type is one of the 2-pole Resonant or 4-pole Resonant settings, or Multi Filter. Resonance
Bass controls the character of the lter resonance at low cuto frequencies. Its eect is most noticeable with high
Resonance settings.
Tight produces a more restrained resonance, similar to a classic, American, wood-paneled monophonic synthesizer.
Full produces a wide, boomy resonance, reminiscent of a famous ve-voice American synthesizer.
4-Pole LP/HP/BP/BR
Resonance Type
[Standard, High]
is is available only when the Type is set to one of the 4-pole settings.
Standard provides the resonance character of a typical analog 4-pole lter.
High creates a more pronounced resonance.
To Next Page
Loading...
