Korg wavestate native - Setup Page; Program Setup Parameters; Layer Pitch Adjustment

Setup page
41
Setup page
3: MIDI2: Layer Pitch
6: Arpeggiator
1: Program Setup
4: Layer
Level
5: Voice
Allocation
1: Program Setup
is section includes control of the volume, transposition, trigger, and random tuning for the Program.
2: Layer Pitch
is controls the octave and tuning of the Layer. As with Layer volume, this is saved in the Performance, but not with
the Program—so it’s a good choice when creating detuning or octave osets between Layers, without making the
Program play out of tune if it’s saved and selected elsewhere!
3: MIDI
is section controls MIDI behavior, including MIDI Channel and controller reception.
4: Layer Level
[-Inf, -84.9…+6.0 dB]
is controls the volume of the Layer. Note that this is saved in the Performance, but not with the Program—so it’s a
good choice when balancing levels between Layers.
5: Voice Allocation
is section includes control of Poly/Mono behavior and Unison.
6: Arpeggiator
Each Layer has its own Arpeggiator. Since this is in the Layer, you can leave the Arpeggiator set up and audition it with
dierent Programs.