Wave Sequencing 2.0
40
2. Select the Solo Step command.
e Step will be marked with a yellow outline, and STEP SOLO will appear in yellow at the top of the window.
e Wave Sequence will play as if that Lane was set to loop on the selected Step. Other Lanes will continue to play
normally. If you select other Steps in the current Lane, solo will follow the selected Step.
To exit Step Solo mode, click on the yellow STEP SOLO text at the top of the window. Alternatively, you can bring up
the contextual menu and un-select Solo Step.
Only one Lane at a time can be in Step Solo mode. If you enter Step Solo mode for a second Lane, the rst Lane’s Step
Solo mode is turned o automatically. Changing to a dierent Layer also turns o Step Solo mode.
To Next Page
Loading...
