Korg wavestate native - Pitch Modulation and Portamento; Pitch Modulation Sources; Portamento Controls; Portamento Type and Time

Synthesis page
24
When Slope is 0, playing dierent notes on the keyboard won’t change the pitch at all; it will be as if you’re always
playing C4.
Slope
2oct
1oct
1oct
C4 C5
+2
+1
0
–1
Pitch
Note on Keyboard
Pitch Mod
LFO Intensity
[–144.00…+144.00]
is controls the initial eect of the Pitch LFO on the pitch, in semitones.
Envelope
[–144.00…+144.00]
is controls the initial eect of the Pitch Envelope, in semitones, before any modulation (such as from Velocity,
below).
e Pitch Envelope Sustain Level can be either positive or negative, so the envelope can create negative values.
Vel->Env
[-144.00…+144.00]
is lets you use velocity to scale the amount of the Pitch Envelope applied to pitch, in semitones.
Portamento
Portamento
[O, On]
Portamento lets the pitch glide smoothly between notes, instead of changing abruptly.
On: Turns on Portamento, so that pitch glides smoothly between notes.
O: Turns o Portamento. is is the default.
Fingered
[O, On]
Fingered applies only when Portamento is On.
On: Playing legato will turn on Portamento, and playing detached will turn it o again.
O: Legato/detached playing will not aect Portamento.
Type
[Constant Rate, Constant Time]
Constant Rate: Portamento will always take the same amount of time to glide a given distance in pitch—for instance,
one second per octave. Put another way, gliding several octaves will take much longer than gliding a half-step.
Constant Time: Portamento will always take the same amount of time to glide from one note to another, regardless of
the dierence in pitch. is is especially useful when playing chords, since it ensures that each note in the chord will
end its glide at the same time.