Kramer SL-280 - Page 46

Kramer Electronics Ltd.
SL-280 – Protocol 3000
44
TIME-SRV
Functions
Permission
Transparency
Set:
TIME-SRV
Administrator
Public
Get:
TIME-SRV?
End User
Public
Description
Syntax
Set: Set time server
#TIME-SRV␠
mode,time_server,time_server_sync_hour
␍
Get: Get time server
#TIME-SRV?␍
Response
~nn
@TIME-SRV␠
mode,time_server,time_server_sync_hour,server_status
␍␊
Parameters
mode – 0 (OFF), 1 (ON)
time_server – time server IP address or hostname. IP must be, in the following format:
xxx.xxx.xxx.xxx
time_server_sync_hour – not in use: 0
server_status –
ON/OFF
Response Triggers
Notes
This command sets up the NTP server.
Example
Set time server with IP address of 128.138.140.44 to ON:
#TIME-SRV
1, 128.138.140.44,0
<CR>