Kramer TP-590Rxr

TP-590Rxr - Principles of Operation
11
Figure 4: Controlling a Blu-ray Disk Player via the TP-590Txr
The example in Figure 5 illustrates how to control the projector that is connected
to TP-590Rxr using a remote control, via the TP-590Txr. The IR sensor is
connected to the TP-590Rxr and the IR emitter is connected between the
TP-590Txr and the projector. The projector remote control sends a command
while pointed at the external IR sensor. The IR signal is passed over the HDBT
link and the IR emitter to the projector which responds to the command sent.