Kramer TP-590Rxr - Kramer Protocol 3000 Commands

TP-590Rxr - Protocol 3000
33
10.2 Kramer Protocol 3000 Commands
Command
Description
#
Protocol handshaking
AV-SW-TIMEOUT
Set/get video auto-switch timeout
BUILD-DATE?
Read device build date
CPEDID
Copy EDID data from the output to the input
DIR
List files in device
DISPLAY?
Valid / Invalid output
ETH-PORT
Set/get Ethernet port protocol
FACTORY
Resets the device to factory default
FS-FREE?
Get file system free space
GEDID
Read EDID data
GET
Get file
HDCP-MOD
Set/get HDCP mode
HDCP-STAT?
Get HDCP signal status
HELP
Get command list or help for specific command
LDEDID
Write EDID data to input
LDFW
Load new firmware
LOAD
Load new firmware
LOCK-EDID?
Get EDID lock status
LOGIN
Set/get protocol permission
LOGOUT
Cancel current permission level
MODEL?
Read device model
NAME
Set/get machine (DNS) name
NAME-RST
Reset machine name to factory default (DNS)
NET-DHCP
Set/get DHCP mode
NET-GATE
Set/get gateway IP
NET-IP
Set/get IP address
NET-MAC?
Get MAC address
NET-MASK
Set/get subnet mask
PASS
Set/get Password
PROT-VER?
Get device protocol version
RESET
Reset device
SECUR
Start / Stop Security
SIGNAL?
Get input signal lock status
SN?
Read device serial number
UPGRADE
Perform firmware upgrade
VERSION?
Read device firmware version