Kramer TP-590Rxr

TP-590Rxr - Operating the TP-590Rxr Remotely Using the Web Pages
17
#
Item
Description
1
Delay power off 5V
upon signal loss for
Box
Sets the delay for turning off the 5V output because of a
signal loss on the currently selected input. Value in
seconds
2
HDCP Input Status
Indicates whether the HDCP status of the input, on or off
3
HDCP Mode
Enables and disables HDCP
Note: You must set the HDCP preferences in at least one of the devices, the
transmitter or receiver.
8.3 The Device Settings Page
The Device Settings page lets you:
• View some of the device characteristics, (for example, model and Web
version)
• Edit IP settings, (for example, name and IP address)
• Load and save configurations
• Reset the device to factory default settings