Kramer TP-590Rxr - Default Parameters; Default EDID

TP-590Rxr - Technical Specifications
27
ENVIRONMENTAL
REGULATORY
COMPLIANCE:
Complies with appropriate requirements of RoHs and WEEE
ACCESSORIES:
Power supply (12V, 2A)
OPTIONS:
RK-T2B 19” rack mount;
Kramer external IR sensor (P/N: 95-0104050), Kramer IR emitter
cable (P/N: C-A35/IRE-10), Kramer BC−HDKat6a cable
Two IR Emitter Extension Cables are also available: a 15m cable
and a 20m cable.
Specifications are subject to change without notice.
Go to our Web site at http://www.kramerelectronics.com to access the list of resolutions
9.1 Default Parameters
Parameter
Value
Name
KRAMER_
Model
TP-590RXR
IP Address
192.168.1.39
UDP Port
50000
TCP Port
5000
Network Mask
255.255.0.0
Gateway Address
192.168.0.1
RS-232 Baud Rate
115200
HDCP Mode
Follow output
Audio Selection Mode
Auto
Video Signal Loss Timeout (no 5V)
0 seconds
Video Signal Loss Timeout (5V present)
10 seconds
9.2 Default EDID
Note: For some models of NEC displays/projectors there may be no audio. To
solve the issue:
• Change the revision number in the NEC EDID block from 1 to 3.
• Add the specific vendor in NEC EDID Block 1
Monitor
Model name............... TP-590RXR
Manufacturer............. KMR
Plug and Play ID......... KMR1200
Serial number............ n/a
Manufacture date......... 2015, ISO week 255
Filter driver............ None
-------------------------
EDID revision............ 1.3
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 520 x 320 mm (24.0 in)