Kramer TP-590Rxr

20
TP-590Rxr - Operating the TP-590Rxr Remotely Using the Web Pages
Figure 13: Turning DHCP Off Dialog Box
2. To set a custom IP address, select Custom IP and enter the required
address. To set the default IP address, select Default IP.
3. Click Apply.
The IP address of the TP-590Rxr is changed and the Web page reloads
automatically.
Note: You may have to log in again.
8.3.2 The Load/Save Configuration Facility
The Load/Save Configuration facility (see item 4 in Figure 9) lets you retrieve and
save a configuration.
To retrieve a configuration:
1. Click the Load button.
The File Load browser window appears.
2. Browse to the required file and press Open.
The configuration is retrieved and the success message is displayed.
To save the current configuration:
1. Click the Save button.
The Save Configuration success message is displayed.